LED stadium floodlights illuminating a football pitch at night

Industrial & Architectural Lighting

Commercial and Industrial Lighting, Three Series

High bay, linear, and stadium floodlight ranges — specified for warehouses, retail floors, and sports venues, with the certifications and lead times your project schedule depends on.

Peak Efficacy
200 lm/W

AeroPro high bay, 40,000 lm max

Protection Rating
IP65 to IP66

IK08 on the high bay series

Service Life
100,000 hours

L80B10 lumen maintenance

Lead Time
14 to 30 days

Ex-works, per series and volume

Product Lines

Pick the range that matches your site

Each series is built for a different mounting height and light level. Compare the headline specs below, then open the series page for the full datasheet.

Automated warehouse aisle lit by AeroPro smart LED high bay lights

Industrial High Bay

AeroPro Series Smart LED High Bay Light

Zigbee-controlled high bay at 200 lm/W, built for warehouses, factories, and logistics centres with ceilings above 8 metres.

Power
100W / 150W / 200W
Luminous Flux
40,000 lm (Max)
Protection
IP65 / IK08
MOQ
50 pieces
View AeroPro Series
Office corridor with continuous MatrixLink architectural LED linear lighting

Commercial Linear

MatrixLink Architectural LED Linear Light

Seamlessly linkable linear lighting with UGR<16 glare-free optics for offices, showrooms, and retail floors that need long uninterrupted runs.

Power per Meter
24W / 36W
Glare Rating
UGR <16
Colour Rendering
CRI >90 Ra
MOQ
100 meters
View MatrixLink Series
Football stadium pitch floodlit by TitanX asymmetric LED floodlights

Outdoor Floodlight

TitanX Heavy-Duty Asymmetric Stadium Floodlight

Marine-grade asymmetric distribution for sports stadiums, ports, and airport aprons — built to survive salt spray and hurricane-force wind.

Power Output
400W to 1200W
Luminous Flux
180,000 lm (1200W)
Protection
IP66 / 1000h salt spray
MOQ
10 pieces
View TitanX Series

Specification Comparison

Compare the three series side by side

The specs engineers usually check first. Full photometric data, IES files, and installation guides sit on each series page.

Comparison of AeroPro, MatrixLink, and TitanX lighting series specifications
Specification AeroPro High Bay MatrixLink Linear TitanX Floodlight
Typical Application Warehouses, factories Offices, retail floors Stadiums, ports, aprons
Power 100W / 150W / 200W 24W / 36W per meter 400W to 1200W
Luminous Efficacy 200 lm/W 140 lm/W —
Luminous Flux 40,000 lm (Max) — 180,000 lm (1200W)
Colour Temperature 5000K Cool White 3000K / 4000K / 6000K —
Colour Rendering CRI >85 CRI >90 Ra —
Glare Control — UGR <16 Asymmetric 60° x 120°
Protection Rating IP65 / IK08 — IP66
Smart Control Zigbee DALI-2 Dimmable Programmable Driver
Service Life 100,000 hrs (L80B10) — —
Operating Range AC 90-305V / 347-480V — -40°C to +55°C
Price Range (USD) 45.50 to 78.00 24.00 to 42.50 180.00 to 350.00
MOQ 50 pieces 100 meters 10 pieces
Lead Time 14 to 20 days 15 to 25 days 20 to 30 days

Application Scenarios

Specified for the environment it goes into

Lighting fails for predictable reasons: too few lux on the floor, glare where people work, or fittings that cannot survive the weather. Each series below is built around one of those problems.

High-bay illuminated warehouse racking with smart controls

Warehouses & Factories

Keep the floor lit and the bills down

At 200 lm/W the AeroPro series puts more light on the rack than a standard high bay while drawing less power. IK08 impact rating handles forklifts and pallets, and Zigbee control lets you dim or schedule by zone instead of running every fixture at full output all day.

AeroPro Series

Offices & Retail

Light people stare at for eight hours a day

UGR<16 means designers and shop staff are not looking into a bright line all day. Fittings link end to end for unbroken runs over open-plan floors, and Tridonic or Osram DALI-2 drivers give you dimming that actually works with building management.

MatrixLink Series
Continuous linear lighting along a modern office corridor
Stadium pitch under floodlights during an evening match

Stadiums, Ports & Airports

Where a fitting failure becomes a cancelled event

Asymmetric 60° x 120° distribution puts light where the pitch is instead of spilling into stands and neighbouring facilities. IP66, a passed 1,000-hour salt spray test, and 60 m/s wind resistance cover coastal sites and storm exposure. Integrated 20kV surge protection is standard, not an upgrade.

TitanX Series

Buying Questions

What project buyers ask first

Can I mix the three series in one order?

Yes. They are separate order lines, so you can combine a high bay run, a linear floor, and a floodlight package in one shipment. Lead times are quoted per series and per volume, so a mixed order gets a consolidated delivery date rather than separate arrivals.

What are the minimum order quantities?

MOQ is 50 pieces for AeroPro high bay, 100 meters for MatrixLink linear, and 10 pieces for TitanX floodlights. Below these quantities it becomes a custom production run with different economics — send us your quantity and we will tell you which way it falls.

How long does production take?

Standard production runs 14 to 20 days for high bay, 15 to 25 days for linear, and 20 to 30 days for floodlights, before shipping. Longer lead times apply to bespoke wattages, custom finishes, and non-standard CCT — those go into the quote rather than the catalogue.

Do you supply photometric data and IES files?

Yes. Each series page carries the photometric files and beam angle data your engineer needs for a lighting layout. Ask us for the specific IES file for the wattage you are specifying and we will send it with your quote.

Can you match an existing installation?

Send us the fittings currently on site — a part number, a photo, or the IES file. If it belongs to one of our series we can quote the matching replacement; if it does not, we will tell you whether a cross-reference is realistic before you spend time on it.

How do I get a quote?

Send the series, wattage, and quantity through the contact form. You will get a price, lead time, and freight estimate back — no account needed, and no obligation on a first enquiry.

Next Step

Send us the wattage and quantity.
Get a price, lead time, and freight estimate.

No account needed, and no obligation on a first enquiry. If you have IES files or a fixture schedule, attach them and we will work from those.