CNC Machined Parts — Turn-Mill & Multi-Axis Precision Components
Contact for quote
5-axis milling rotates the tool and the part together, so impellers, blisks, thin-walled housings and contoured medical components are machined complete in one setup. Fewer setups mean fewer alignment errors and a held tolerance of ±0.005 mm across curved and angled features. PufferGo runs 50 imported 5-axis CNC machines from our 12,000 m² Dongguan factory, programming in CAM with full simulation before the first chip is cut. We serve medical device brands and automotive buyers across North America and Europe.
Simultaneous 5-axis and 3+2 positioning handle undercut features, deep pockets, ruled surfaces and wall thickness down to 0.5 mm without distortion. We machine aluminum, stainless 304/316, titanium Gr5, Inconel 718 and engineering plastics such as PEEK. Surface finishes reach Ra 0.8 µm as milled, with mirror polishing and bead blasting as finishing steps for visible or sealing surfaces.
We take the same 5-axis program from a 1-piece prototype to 10,000 pieces without redesign. Prototype parts ship in 5 days, and validated programs transfer directly to production on identical machine platforms, so tolerance and finish do not drift between sample and series. Annual capacity of 5 million pieces across 8 production lines supports bridge production and ongoing OEM supply.
Impellers & Blades
Radial and centrifugal impellers, turbine blades and blisks in aluminum, titanium and Inconel.
Medical Implants
Patient-specific guides, trial components and instrumentation in titanium and PEEK.
Thin-Walled Housings
Lightweight enclosures and structural brackets with walls from 0.5 mm.
PufferGo has held ISO 9001 certification since 2013 and maintains IATF 16949 for automotive precision parts. Every 5-axis part is probed in-process on the machine, and first articles are verified on a 3D CMM with laser scanning and blue-light scanning for free-form surfaces. Reports are digital and traceable to the part serial. Our 99.2% yield and 800+ served customers are measured across every production line.
Upload your STEP or IGES file to sales@puffergo.com. Our engineers reply within 24 hours with DFM feedback, machinability notes and a firm quote. First articles in 5 days, production to ±0.005 mm, shipped worldwide from Dongguan.
Fill out the form below and we will get back to you as soon as possible.